(NOTE: The file system format of USB storage disk must be FAT32)Ĥ) Plug the USB Drive into the USB port on the unit.ĥ). PX5 FILES.png (7.66 KiB) Viewed 58324 timesģ) Copy them to the Root Directory of the USB disk. You will need to use software such as winrar or 7 Zip to extract them onto the root of your USB stick These are the files you should get: Regular update (when the system still runs normally):ġ) Find the model of your stereo and contact XTRONS SUPPORT for the 'Firmware Update Link'. Target Models: PA/PB/PBX/PQ/IN/IB/TB/TA/TQ/TIB/D715/TSN/PSN/QSF series:

You can also use SD card instead of USB drive for the update files and use the GPS card slot on the unit.The Reset hole is marked with the word RST. XTRONS head units come with a Reset button which resides behind a small hole located either on the front or on one of the sides of the front panel.Before doing any firmware updates for your devices, make sure that you walked through every step we've shown in this guide.

it’s ideal to check what firmware version you have on your current car stereo before the update, as you might already have the latest version out of the box if you have just recently purchased it. Please contact XTRONS support for the firmware files. The customer is responsible for the selection and installation of this software as well as the result of using this software. So, please always double check those model numbers before applying a firmware update. The old firmware gets overwritten (replaced) by new operating instructions that aren't compatible with your model, which means your device won't work anymore. Applying an update intended for a similar-but-different model could result in your gear becoming non-operational.

Before applying a system update, you need to make sure that the update is for your exact model of device.

Xtrons firmware update